I live in a shotgun style home, where we have no hallways and it's basically just series of rooms, back to back. Some shotgun homes have doors to separate the rooms, but some, like mine, only have doorways. No doors. I've grown accustomed to the openness of being able to see basically all of the rooms if you look through a doorway, but I did also somewhat miss having a bit of separation between each room. My solution to this was to whip up a few sheer noren curtains. So of course, I'm going to be sharing with you this easy sewing project!
Supplies
First, you'll need to measure the width of your door and then how long you want the curtains to fall.
Divide the width by half. Add 1/2 of an inch to each side. Add 4 inches on top and 2 inches on bottom. Cut out these two measurements from your fabric.
Put the fabric together, right sides together, mark down 8 inches, 1/2 of an inch in. (Note: My measurements are twice as big because after cutting the fabric, I realized I didn't have to finish the outer edges of the curtains because they were the selvage edges. So instead of trimming 1 inch off every piece of fabric (I made 3 all together) I just made the seams twice as large on the inside.
Sew along the line and then fold open.
Fold 1/4 of an inch and iron that down. Then fold another 1/4 of an inch, iron again and pin. I skipped all of the ironing parts on the first one I made, which was a huge mistake. For the other two I ironed after each fold and it made the job so much easier. So do as I say, not as I do.
Sew the seam down along the edge. This will encase the raw edge of the fabric in the seam, making them look nice and neat! Repeat this process on the outer edges of the curtain. Fold 1/4 inch, iron, fold 1/4 inch, iron, pin, sew.
For the top, fold down 1/4 inch, iron, fold down 2 inches, iron, pin, sew.
For the bottom, fold down 1/4 inch, iron, fold down 1 inch, iron, pin, sew. Repeat on the other flap.
And you're done!
Now from here you can either leave them plain or you can decorate! I was already thinking about decorating them, but after I put up this plain one to see how it looked, I decided I was definitely going to decorate them. They just didn't do it for me in their plain state. It probably didn't help that this particular curtain looks horrible because the tension of my sewing machine was off so it puckered the seams really bad.
But anyway, to decoration!
For this one I drew an ensō circle. It's supposed to "express a moment when the mind is free to let the body create." I thought it would be perfect to put up in one of the doorways to our office/studio/wood shop.
For this one I just painted some pretty standard bamboo.
And for this one I painted the whole curtain, sans a circle in the middle, with a dark greyish blue. After that dried I painted the circle with liquid gold leaf.
And here they are all hung up!
I hope you all enjoyed this project! I'm glad I didn't give up after I hung that first plain one. I almost did. But I think they look so much better after painting on them.
What do you all think?
Note: paperclips and safety pins are listed as items you can use as the hanger for the plate, however I made my own out of wire, so that's why there are also pliers, wire cutters and wire pictured in the photo.
Shape the wire into the hanger. Basically making it into a curly, pretty upside-down letter V. That's all. Nothing more.
Since my plates had a design that required them to be situated a certain way, I eyeballed it and marked on the back where I wanted to put the hangers.
Mix epoxy into disposable container. I used an old medicine measuring cup. If you're doing more than a few plates, like me, you'll have to make a few small batches of the epoxy because it sets very fast.
Place hangers where you marked earlier and apply epoxy to the curled ends. Let cure for 24 hours(or per instructions).
Hang them up and enjoy!